2024 Brass Flush Mount Ceiling Light or Wall Sconce - Small Lamp - Minimalist Lighting - Natural Brass Finish

Brass Flush Mount Ceiling Light or Wall Sconce - Small Lamp - Minimalist Lighting - Natural Brass Finish

The Lume
With its clean lines and classic brass construction, the Lume is as simple as it gets, but is also the most versatile. Hang from the ceiling for industrial overhead lighting, or from the wall as a minimalist sconce. The timeless look of brass is the perfect compliment to any modern or classic design. Right at home in an industrial warehouse, farmhouse, or city highrise.

Suitable for damp locations. UL listing for damp location option. See below.


SPECS

Dimensions:
Base, 5" diameter x 1/4" deep
Total height, 2 5/8"

Finish:
Natural Brass - This brass has character. It is hand-finished, and has more of a brushed look (not overly shiny or highly polished) and will develop a beautiful natural patina as it ages. Return it to a new looking finish with steel wool or metal polish at any time.
Lacquered Brass - The same beautiful brushed brass look as the natural finish, but sealed with a clear coat of lacquer to prevent the patina from developing and keep the brass looking new.

The 2024 Lume is also available in copper, polished nickel, oil rubbed bronze, bronzed steel, gunmetal, and rusted finish. To see our full line of Lume finishes, please visit our website at khalimalights.com/shop/?category=Lume

Bulb Type:
Medium base Incandescent or LED (shown bulb is G40 size frosted bulb in 40 watts; not included)

Max Wattage:
60 watts (ceiling mount installation)
100 watts (wall mount installation)

Location:
Suitable for damp locations. This covers any interior location including bathrooms as well as sheltered outdoor locations.

Mounting:
Hardwire, flush to receptacle in ceiling or wall
Mounting hardware included
Standard electrical/mounting version pictured
UL listed electrical/mounting version (not pictured) will come with external, visible mounting hardware - see #2 External mounting method for description

*We make this fixture in two ways, so that you can choose a mounting method:

1. Internal mounting: As seen in the listing photo, the base of the light is solid, without any visible mounting holes. If we make it this way, the light will mount by a short threaded bolt that comes out from the back (it is attached to the electrical socket) and extends approximately 3/16" from the back of the light. This bolt screws into a threaded hole in the mounting bracket, which we supply. The bracket attaches to your electrical junction. First your electrician would mount the bracket, attach the electrical wires, then screw the fixture into the mounting bracket's threaded hole. This method does twist the wiring somewhat, but after just a few turns, the light should, in most cases, be flush to the ceiling or wall.

2. External mounting: The other way the light can be mounted is with external mounting hardware. Two small holes are pre-drilled into the fixture on either side of the copper tube that covers the electrical socket. Two mounting bolts with small finished decorative caps are sent along with your fixture, as well as a special mounting bracket that is threaded to receive the two mounting bolts. Your electrician would mount the bracket to the junction, thread the bolts into the bracket, wire the light and place the fixture over the mounting bolts, then attach the caps. External method is required for UL listed lights.



To see the rest of our designs, please browse through our shop at www.etsy.com/khalimalights
Or check out khalimalights.com to see our full line of handcrafted lighting and portfolio of custom projects.

Thank you for peeking in our shop. Handmade is made with love!