24” x 24” x 3” NO SEAL FORM,
Fabricated with 3/8” HDPE, the strongest 2024 No Seal on the market.
5 degree sides allow easy removal of the cured project.
Clamps and HDPE blocks not included
WARRANTY POLICY:
Place Form flat on a work table, do not have it elevated (Blocks, saw horses, clamps). If elevated the form will bow due to the epoxy heating up and expanding the HDPE.
We will provide warranty on any cracks that appear.
Please use rubber mallet to tap your cured project out of the form by gently hitting the inside of the sides and flipping over and hitting the bottom. Using excessive force inside on the sides and using a metal hammer will void any warranty.
Please read carefully instructions on how to mix and pour your Epoxy.
Epoxy that does not cure properly will make it impossible to remove your project.
Epoxy that over heats during the curing process will twist the Form, sometimes adhering to the form. Again making it very difficult to remove your project for the form.
Product code: Premium 2024 24” x 24” x 3” NO SEAL Form - Reusable Epoxy/Resin Form